Best Audio Crossover in 2022 [*Top Picks*]
Looking for the best audio crossover on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.
1901 Reviews Scanned
Clarion MCD360 2/3-Way 6-Channel Electronic Crossover w/ 5-Volt RCA Outputs + Subwoofer Equalizer
Country Of Origin : China
Package Weight : 1.157 Kg
Package Quantity : 1
Front/Rear/Subwoofer Lever Control
6/4/2 Channel RCA Inputs
6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
Front/Rear/Subwoofer Lever Control - Subwoofer Equalizer and Boost Level Controls
High-Pass Crossover Frequency Multiplier
Remote Subwoofer Level Control (Included) -Gold Plated Terminals
AudioControl DM-810 8 by 10 Channel Matrix Digital Signal Processor
Input and Output RTA for precise and informed tuning
30 band equalizer
Optional ACR-3 remote for preset recall and level control
DM Smart DSP
Audiopipe CRX-203 2 Way 4 Ohm Car Audio Passive Crossover Networks (2 Pack)
2 Audiopipe Passive 2 Way Car Audio Crossover / Two-Way Speaker and Tweeter 300W
Rockville RX230 2 Stereo / 3 Way Mono Crossover with XLR Input and Output
Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover. Ability to mix 2 channels output. 24dB/Octave filters. Mute switches.
Channel Gain Control: 0 to +12 dB. Low Frequency Level Control: -∞ to +6 dB. High Frequency Level Control: -∞ to +6 dB.
Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes. Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz).
Switchable 2-way stereo or 3-way mono operation. Subwoofer out. Subwoofer X-Over Freq ( 30Hz – 200Hz ) adjustable.
Subwoofer Gain -6 to +6 dB. Specifications: Each output is -3 dB at the selected crossover frequency value.
Outputs are essentially flat within their relative passbands. Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz.
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB.
Low Frequency Output: -86 dBu below 80 dB. High Frequency Output: -84 dBu below -78 dB. Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu.
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced. Input Impedance: 10k ohms unbalanced. Dimensions: 19 x 4.85 x 1.8 inches.
Gross weight: 4.18 Lbs. Connectors: Inputs: XLR Balanced. Outputs: XLR Balanced. Power Requirements: 120V AC, 50/60 Hz, 20 watts. 110-120V voltage.
Infinity - Two Pairs of KAPPA-60CSX Kappa 6.5 Inch Two-Way Car Audio Component Speakers with Crossovers
Infinity’s glass fiber woofer cones are lighter and stiffer with more cone-area than the competition , delivering increased low-frequency output and higher efficiency.
Edge-driven textile dome tweeters - These are not commonly used W-domes, but edge-driven textile dome speakers that will deliver broader and smoother high frequency response.
High output 2.5 ohm ohm architecture with low impedance voice coils enables the speaker to extract every watt from the amplifier and deliver peak power with ease.
Infinity speakers have to undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Infinity is in the business of designing reference quality speakers, and Kappa car audio speakers are no exception.
Audiotek CX3 Max Power 500W 2 Way 4 Ohm Car Audio Passive Crossover Networks (2 Pack) 2 or 4 Channels 2-Way Crossover High and Low Frequency Response
2 Pack of 2-Way Crossover
High and Low Frequency Response
Max Power: 500W
Frequency Crossover: 3.5kHz
Car Audio Passive Crossover Networks
PRV AUDIO EX4.6 PRO 4 Way Crossover Car Audio, 4 in 6 RCA Output, 9 Volts RMS Electronic Crossover
INNOVATIVE: PRV EX 4.6 PRO electronic crossover gives you the power to customize your sound with a wide frequency of filter adjustment
ADJUSTABLE: Featuring 4way adjustable HIGH PASS and LOW PASS filters and also output level control on each channel, plus adjustable BASS BOOST option on the Sub Out channel
DESIGNED FOR EFFICIENCY: Quick On/Off button for each channel AND a Crossover slope rate: Butterworth 12 db/Octave
INPUT AND OUTPUT FUNCTIONS: 2/3/4 RCA inputs for 3 Channels – 1 Stereo and 2 Mono, or 6 RCA outputs for 4 Channels – 2 Stereo and 2 Mono
UPGRADE TODAY, HEAR THE DIFFERENCE: PRV AUDIO bringing innovation and technology to the automotive sound market for the past 15 years
MUSYSIC MU-CO4W PROFESSIONAL 2/3/4-WAY AUDIO STEREO SOUND PROCESSING CROSSOVER
Crossover Range: Subwoofer: 50-250 Hz; Low/High: 70-1000 Hz; Mid/High: 480-7000 Hz
Frequency Response: 20Hz-25kHz (1dB) / Low Cut Filters: 30Hz / -3dB, 12dB/Octave / Signal-to-Noise Ratio: 80dB
Total Harmonic Distortion: <0.05% / Input Impedance: 100k Ohms / Output Impedance: 220 Ohms
Unbalanced XLR 1/4" input jacks / Balanced XLR, 1/4" outputs
19" Rack Mount
PRV AUDIO DSP 2.8X Car Audio Crossover and Equalizer 8 Channel Full Digital Signal Processor DSP with Sequencer
INTUITIVE INTERFACE: Through an LCD display (16x2 Characters) and intuitive interface, it allows real-time audio adjustments
HANDLES IT ALL: The DSP2.8X features 2 audio inputs (A and B) and 8 independent outputs and allows you to choose the audio source (A, B or A + B) for each output
INTEGRATED EQUALIZATION SYSTEM: With 15 band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão)
PROFESSIONAL EQUALIZATION: For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control
SEQUENCER FEATURE: The PRV DSP2.8x allows sequential triggering of other products through the remote trigger connection (REM) with three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN)